D-LINE

Technology that allows decorations to be produced on our single fire production lines.

DETALLE_BRICK CAPRI WHITE 35X35

Technology based on surface decoration (on the line) of the ceramic piece through a chemical reaction of a special ink applied digitally. It provides appreciable reliefs to sight and touch, while also offering extra protection for the conventional ceramic colors applied.

It is therefore an alternative to pressed micro-reliefs as you can decide the design on each piece and not a unique one as it has traditionally been offered.

D-LINE
D-LINE Plus

ADVANTAGES OVER OTHER PRODUCTS

Lower cost of production

It is manufactured on the same production line, so it does not require a second production process. Energy costs are saved.

Savings on Transportation costs.

Since it does not need to be produced a second time, shipping to an external company for the application of the second design is avoided. Environmental pollution is reduced.

A second fired is not needed

The inks along with the granules do not require a different firing from the usual depending on the product type, so the finished product comes out in a single firing. The oven's energy cost is reduced.

A second packaging process is saved

It does not require unboxing the product, applying the new design, and repackaging. Energy and paper costs are saved.

The price of the final product is 3 times lower

Due to the savings during the production processes, product transportation, packaging and handling costs, it allows the product to be sold by square meters and not to pieces.

There are not minimum purchase requirements

It is not necessary to buy a minimum quantity of pieces since we decide the quantity to be produced on each production batch.

Lower production cost because the press mold is not needed

Reliefs are achieved without the use of molds, therefore, reducing the production cost.

The number of different designs are our choice.

By not requiring mold we can chose the relief we want in the design.

The Price of the finish product is lower

Avoiding the use of molds allows us to have a product with different reliefs at no extra cost.

Light transit without loss of shine and design

Similar finishes to a third fire are achieved and suitable for light traffic without significant weathering (PEI 3).

D-LINE collections: